Author Index

A

  • Aghaei, Erfan Zeolite Y synthesis from rice husk ash as Si source using hydrothermal and hydrothermal assisted ultrasound methods used in catalytic cracking of liquid hydrocarbons [Volume 12, Issue 3, 0, Pages 1-15]
  • Alipoor, Alireza Improvement of combustion characteristics for hydrogen-air mixture using modular structure in a novel micro combustor [Volume 12, Issue 4, 2019, Pages 1-13]
  • Ameri Mahabadi, Hossein Dielectric Properties of Castor-based Biodiesel Using Microwave [Volume 12, Issue 1, 2019, Pages 1-12]
  • Aminian, Javad Implementation and economic analysis of MILD combustion in a lab-scale boiler [Volume 12, Issue 3, 0, Pages 17-37]
  • Amiri, Hossein Energy analysis and experimental investigation on the effective parameters to improve process for biogas production from food waste [Volume 12, Issue 3, 0, Pages 73-86]
  • Ashini, hossein Influence of Inlet Temperature and Pressure in Transcritical and Supercritical Laminar Counter-Flow Flame of Liquid Oxygen/ Gaseous Methane [Volume 12, Issue 1, 2019, Pages 77-96]
  • Askari, Mahsa Zeolite Y synthesis from rice husk ash as Si source using hydrothermal and hydrothermal assisted ultrasound methods used in catalytic cracking of liquid hydrocarbons [Volume 12, Issue 3, 0, Pages 1-15]

D

  • Davazdah Emami, Mohsen Investigation of Injection Angle Influence on an Air/Fuel Premixer Performance Using Numerical Simulation [Volume 12, Issue 4, 2019, Pages 65-76]

E

  • Ehsaniderakhshan, Faezeh Noise calculation in a turbulent non-premixed flame using a hybrid analytical-LES method [Volume 12, Issue 3, 0, Pages 107-124]
  • EMAMI, SOBHAN Numerical Study of the Effect of Moisture Content, Particle Diameter and Fuel Mass Loading on Combustion of Solid Fuel Derived from Refinery Oily-Sludge [Volume 12, Issue 1, 2019, Pages 31-49]
  • Ershadi, Ali Prediction of turbulent Prandtl number in the methane-air combustion using a second-order turbulent scalar flux model [Volume 12, Issue 2, 0, Pages 31-48]
  • Eslami, fatemeh Statistical optimization using central composite design for the desilication process of natural zeolite to use in water adsorption from diesel fuel [Volume 12, Issue 4, 2019, Pages 97-110]

F

  • Farahvashi, Soulmaz Numerical Study of the Effect of Moisture Content, Particle Diameter and Fuel Mass Loading on Combustion of Solid Fuel Derived from Refinery Oily-Sludge [Volume 12, Issue 1, 2019, Pages 31-49]
  • Farajollahi, Hossein Investigation on post-combustion CO2 capture from NGCC power plant [Volume 12, Issue 2, 0, Pages 15-29]
  • Farshchi, Mohammad Influence of Inlet Temperature and Pressure in Transcritical and Supercritical Laminar Counter-Flow Flame of Liquid Oxygen/ Gaseous Methane [Volume 12, Issue 1, 2019, Pages 77-96]
  • Fazlollahi-Ghomshi, alireza Effect of swirl intensity on ignition probability and kernel propagation in ADSB (Amirkabir Double Swirl Burner) [Volume 12, Issue 4, 2019, Pages 129-158]

G

  • Ghobadian, Barat The investigation of production processing effect on some bioethanol qualitative properties [Volume 12, Issue 3, 0, Pages 39-51]
  • Ghofrani, Iraj RCCI Combustion Description with Production and Consumption of Important Species [Volume 12, Issue 2, 0, Pages 49-61]

H

  • Habibi, Hessamedin Numerical Study of the Effects of Injection Timing and Using Group-Hole Nozzle for Fuel Injection in a Compression Ignition Engine [Volume 12, Issue 1, 2019, Pages 51-76]
  • Habibirad, Saeed Numerical simulation and experimental investigation of a premixed cylindrical burner with gas mixing system using in condensing boiler [Volume 12, Issue 4, 2019, Pages 33-50]
  • Haghighi Khoshkhoo, Ramin Implementation and economic analysis of MILD combustion in a lab-scale boiler [Volume 12, Issue 3, 0, Pages 17-37]
  • Hossainpour, Siamak Investigation on post-combustion CO2 capture from NGCC power plant [Volume 12, Issue 2, 0, Pages 15-29]
  • Hosseini, Vahid RCCI Combustion Description with Production and Consumption of Important Species [Volume 12, Issue 2, 0, Pages 49-61]

I

  • Iranmanesh, masoud Energy analysis and experimental investigation on the effective parameters to improve process for biogas production from food waste [Volume 12, Issue 3, 0, Pages 73-86]

J

  • Jafari, Mohammadhossein Effects of combustion model in predicting pool fire and fire plum behaviors using a large eddy simulation method [Volume 12, Issue 3, 0, Pages 87-105]
  • Jahanian, Omid Simulation Study on the Effects of Methane – Normal Heptane Blend Fraction on the Performance of a Reactivity Controlled Compression Ignition (RCCI) Engine [Volume 12, Issue 4, 2019, Pages 15-31]

K

  • Karimzadeh, Ramin Investigation of the Effect of Boron Promoter on Structural Properties of NiMo Nanocatalyst supported on Red Mud synthesized by Impregnation Method for Hydrocracking and Hydrodesulfurization of Oil Cuts [Volume 12, Issue 1, 2019, Pages 97-117]
  • Karimzadeh, Ramin Synthesize of Zirconia-Promoted NiMo Nanocatalyst supported on red mud via impregnation method used in Hydrodesulfurization of oil cuts [Volume 12, Issue 2, 0, Pages 75-88]
  • Karimzadeh, Ramin Zeolite Y synthesis from rice husk ash as Si source using hydrothermal and hydrothermal assisted ultrasound methods used in catalytic cracking of liquid hydrocarbons [Volume 12, Issue 3, 0, Pages 1-15]
  • Karimzadeh, Ramin Statistical optimization using central composite design for the desilication process of natural zeolite to use in water adsorption from diesel fuel [Volume 12, Issue 4, 2019, Pages 97-110]
  • Khabbazian, Ghasem Implementation and economic analysis of MILD combustion in a lab-scale boiler [Volume 12, Issue 3, 0, Pages 17-37]
  • Khodabakhshikoulaei, Azar The investigation of production processing effect on some bioethanol qualitative properties [Volume 12, Issue 3, 0, Pages 39-51]
  • Khoshtaghaza, Mohammad Hadi Dielectric Properties of Castor-based Biodiesel Using Microwave [Volume 12, Issue 1, 2019, Pages 1-12]
  • Kouhestani, Fatemeh Statistical optimization using central composite design for the desilication process of natural zeolite to use in water adsorption from diesel fuel [Volume 12, Issue 4, 2019, Pages 97-110]
  • Kousheshi, Navid Effect of the composition of syngas derived from biomass gasification on performance and emission characteristic of a diesel-syngas RCCI engine [Volume 12, Issue 4, 2019, Pages 77-95]

M

  • Mahdavy-Moghaddam, Hossein Numerical simulation of asphalt water slurry gasification process in an entrained flow gasifier [Volume 12, Issue 1, 2019, Pages 13-30]
  • Mahmoudi, Yasser Noise calculation in a turbulent non-premixed flame using a hybrid analytical-LES method [Volume 12, Issue 3, 0, Pages 107-124]
  • Mardani, Amir The effect of pre-heating and dilution level on the combustion field and ‎flue gas composition of an oxy-MILD combustion system in a ‎laboratory‏-‏scale furnace [Volume 12, Issue 3, 0, Pages 53-71]
  • Mazaheri, Kiumars Noise calculation in a turbulent non-premixed flame using a hybrid analytical-LES method [Volume 12, Issue 3, 0, Pages 107-124]
  • Moghadasi, Mohamad Hassan The effect of pre-heating and dilution level on the combustion field and ‎flue gas composition of an oxy-MILD combustion system in a ‎laboratory‏-‏scale furnace [Volume 12, Issue 3, 0, Pages 53-71]
  • Mohebbi, Mostafa RCCI Combustion Description with Production and Consumption of Important Species [Volume 12, Issue 2, 0, Pages 49-61]

N

  • Noroozi, Mohammad Javad Numerical Study of the Effects of Injection Timing and Using Group-Hole Nozzle for Fuel Injection in a Compression Ignition Engine [Volume 12, Issue 1, 2019, Pages 51-76]

P

  • Pasdarshahri, Hadi A Comprehensive study on simulation of turbulent combustion using modified perfectly stirred reactor model [Volume 12, Issue 2, 0, Pages 89-101]
  • Pasdarshahri, Hadi Effects of combustion model in predicting pool fire and fire plum behaviors using a large eddy simulation method [Volume 12, Issue 3, 0, Pages 87-105]
  • Pasdarshahri, Hadi Numerical simulation and experimental investigation of a premixed cylindrical burner with gas mixing system using in condensing boiler [Volume 12, Issue 4, 2019, Pages 33-50]
  • Pourmousavi, Iman Simulation Study on the Effects of Methane – Normal Heptane Blend Fraction on the Performance of a Reactivity Controlled Compression Ignition (RCCI) Engine [Volume 12, Issue 4, 2019, Pages 15-31]

R

  • Rahmati, Mahmoud Energy analysis and experimental investigation on the effective parameters to improve process for biogas production from food waste [Volume 12, Issue 3, 0, Pages 73-86]
  • Rajabi Zargarabadi, Mehran Prediction of turbulent Prandtl number in the methane-air combustion using a second-order turbulent scalar flux model [Volume 12, Issue 2, 0, Pages 31-48]
  • Rashvand, Mahdi Evaluation of heat value of biodiesels produced from solar collector-biofuel hybrid system by dielectric spectroscopy techniques [Volume 12, Issue 2, 0, Pages 63-74]
  • Reyhanian, Masoud RCCI Combustion Description with Production and Consumption of Important Species [Volume 12, Issue 2, 0, Pages 49-61]
  • Riazi, Rouzbeh The effect of pre-heating and dilution level on the combustion field and ‎flue gas composition of an oxy-MILD combustion system in a ‎laboratory‏-‏scale furnace [Volume 12, Issue 3, 0, Pages 53-71]

S

  • Saberimehr, Ali Effect of the composition of syngas derived from biomass gasification on performance and emission characteristic of a diesel-syngas RCCI engine [Volume 12, Issue 4, 2019, Pages 77-95]
  • Saidi, Mohammad Hassan Improvement of combustion characteristics for hydrogen-air mixture using modular structure in a novel micro combustor [Volume 12, Issue 4, 2019, Pages 1-13]
  • Seddiq, Mahdi Numerical Study of the Effects of Injection Timing and Using Group-Hole Nozzle for Fuel Injection in a Compression Ignition Engine [Volume 12, Issue 1, 2019, Pages 51-76]
  • Shahanaghi, Ali A Comprehensive study on simulation of turbulent combustion using modified perfectly stirred reactor model [Volume 12, Issue 2, 0, Pages 89-101]
  • Shayannejad, ardeshir Evaluation of heat value of biodiesels produced from solar collector-biofuel hybrid system by dielectric spectroscopy techniques [Volume 12, Issue 2, 0, Pages 63-74]

T

  • Tabasizadeh, Mohammad The investigation of production processing effect on some bioethanol qualitative properties [Volume 12, Issue 3, 0, Pages 39-51]
  • Tabejamaat, Sadegh Effect of swirl intensity on ignition probability and kernel propagation in ADSB (Amirkabir Double Swirl Burner) [Volume 12, Issue 4, 2019, Pages 129-158]
  • Tajik, Hamid reza Effect of swirl intensity on ignition probability and kernel propagation in ADSB (Amirkabir Double Swirl Burner) [Volume 12, Issue 4, 2019, Pages 129-158]
  • Taqizadeh, Atie Simulation Study on the Effects of Methane – Normal Heptane Blend Fraction on the Performance of a Reactivity Controlled Compression Ignition (RCCI) Engine [Volume 12, Issue 4, 2019, Pages 15-31]

Y

  • Yari, Mortaza Effect of the composition of syngas derived from biomass gasification on performance and emission characteristic of a diesel-syngas RCCI engine [Volume 12, Issue 4, 2019, Pages 77-95]
  • Yousefi Mojir, Kamran Numerical simulation of asphalt water slurry gasification process in an entrained flow gasifier [Volume 12, Issue 1, 2019, Pages 13-30]

Z

  • Zahedi, Alireza Evaluation of heat value of biodiesels produced from solar collector-biofuel hybrid system by dielectric spectroscopy techniques [Volume 12, Issue 2, 0, Pages 63-74]
  • Zarei, Reza Investigation of Injection Angle Influence on an Air/Fuel Premixer Performance Using Numerical Simulation [Volume 12, Issue 4, 2019, Pages 65-76]
  • Zarein, Mohammad Dielectric Properties of Castor-based Biodiesel Using Microwave [Volume 12, Issue 1, 2019, Pages 1-12]